Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. However when windows with double panes are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance you'll need locate some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you are going to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your home until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window repair to get to the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close your window and do an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if get up each morning to find mouldy walls and wet floors. Windows that leak water do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer is applied. It is important to remember that when it comes to upvc window repairs (visit), you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal rather than the frame. This can be easily repaired by a upvc window repair near me window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze It could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. It's very simple to change the hinges on a window but it's much simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or UPVC Window Repairs by improper installation in the factory. Sending us photos through our website can often resolve the problem. We are always happy to provide assistance.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause an opening to appear where the sash joins the frame. They can be fixed by giving them a thorough clean, however when they're beyond repair, it could be necessary to have them aligned or replaced. In addition, the interlock could be misaligned. It is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace them.

These seals can wear down or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the risk of draughts.

One of the most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is cheaper to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.