Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap between the door and the window is large, you might prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues that include sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and wet floors. The leaks of water from windows do can not only cause destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed glass, it is more likely the issue is more related to the seal, not the frame. Again this can easily be fixed by an upvc window repair window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze It could be hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges will wear out over time. It is essentially a very simple process but it can be easier to do if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, upvc window Repair such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also lower the risk of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash and frame meet. If they are beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window repairs near me window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be placed on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to recognize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than fix them. So, if you are experiencing problems with your upvc Window repair windows, it is best to seek professional assistance immediately.