Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. However when you have double pane windows that are secured by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this case, you will need to find some plastic spacers that aid the new pane in being able to fit properly into the window frame.

If you plan to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

Upvc windows and Double glazed window repairs near me doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows so you can get at the frame. After that, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you can't reposition the hinges, double glazed window repairs near me you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wearing out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need close your window and do an experiment fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the caulking used previously may require removal before a fresh layer is applied. It is essential to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your Double glazed window Repairs near me glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A upvc window repairs specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with a breeze. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It is an easy process but it can be easier with someone else to assist in holding the frame up.

Make sure that the upvc window repair hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also decreases the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become disaligned as a result of wear, creating an opening where the sash and frame meet. This can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it is possible to just give them a clean but in some instances it could be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as possible.