Autowatch Ghost Installation

Autowatch Ghost is an immobiliser that guards you against hacking and key-cloning. It also stops vehicle theft. It could lower your insurance rates and you may even be eligible for incentives.

The Ghost immobiliser, which is discreet and easy to operate, is integrated into the ECU of the vehicle. This makes it impossible for the engine to start without an unintentional code.

TASSA Approved

If you wish to stop your vehicle from being stolen with key cloning then you'll need the TASSA verified Autowatch Ghost immobiliser system. It is the latest technology in car ghost immobiliser security technology and thwarts thieves in two ways. It will stop your car from starting if your keys are cloned and also stops you driving away if they've taken your key fobs.

The Ghost is the newest generation and connects to the CAN data network of your vehicle. A personalised PIN code can be entered using the standard buttons on the dashboard or steering wheel. The Ghost will then stop the engine from beginning. It can be programmed with a variety of settings such as Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is completely undetectable because it does not utilize radio frequencies.

The Ghost is a small weatherproof device that is completely sealed. It can be placed on the dashboard or within the vehicle. Contrary to other alarms and immobiliser devices on the market this is not a Thatcham Category approved product, but is recognized by insurance companies as a reliable anti-theft device. It also comes with a 5 years warranty.

The TASSA procedure guarantees that any installation work on the Ghost is completed by a qualified installer. This gives the customer's, insurers and police confidence in the high-quality installation. This also ensures that the installers adhere to the directions of the product manufacturer and correctly install the product. Installers who are TASSA members have a commitment to excellence, and want to make a difference in the fight against criminality.

Compatible with a wide range of vehicles

The Autowatch Ghost 2 is a cutting-edge immobiliser that is designed to safeguard your vehicle against modern day key copying. Its PIN code system is integrated into the ECU of your car, making it more difficult for thieves to clone the keys or hack the system of your vehicle. The device is also discreet and can easily be installed in a variety of vehicles including minivans as well as sports cars. It is also weatherproof and small enough to hide away from view which makes it more difficult for thieves to spot.

Installation of the Ghost is simple and doesn't require any additional wiring. It is compatible with many vehicles and communicates using the vehicle's data network, CAN. It can also be deactivated or shut off by navigating to the main screen of the vehicle. The device is compatible with numerous applications on mobile devices that allow you to manage the security of your vehicle remotely.

The Ghost may have some issues following installation, despite its numerous advantages. These issues can be caused by a number of causes, including defective wiring or a mobile app that isn't compatible. In these cases, speaking with a professional installer is the best way to fix the issue.

Another issue faced by users is the difficulty entering the Ghost 2 immobiliser's disarm sequence. This is usually due to not remembering the correct sequence or not rehearsing it. The manual of the device contains an emergency code that can be used in the event that such problems occur.

Distinction

Autowatch Ghost is an advanced and discrete security system that guards against vehicle theft. It uses the vehicle's CAN data network to function and is invisible to thieves, making it an extremely effective deterrent. It also has the ability to be triggered by other security systems, such as car alarms, [Redirect Only] and also provides real-time call alerts to the owner. These features can help police in finding your vehicle if it is stolen.

This system can be put in place in just a few minutes and is compatible with the majority of vehicles. It's an aftermarket device TASSA-approved that works with vehicle trackers and is even recognized by a few insurance companies. It's also tamper-proof, and quiet and therefore criminals won't able to hear it operating. The Ghost immobiliser is also programmable to require a PIN of up to twenty digits. This makes it almost impossible to guess.

Another advantage of the Ghost is that it can only be activated when the vehicle is in Service/Valet mode. This means that you won't accidentally give your PIN number to anyone who needs access to the computer system of your vehicle, like mechanics. The ghost ii immobiliser also has a five-year guarantee.

The autowatch ghost immobiliser (resources) is a revolutionary security device that stops key cloning, ECU hacking and car theft. It's an aftermarket CAN bus device that's a great option for new and older vehicles. It's easy to install, and it works quietly. This enables it to be used in any car without cutting wires. It also allows you to change your pin number easily and only you will are aware of it. It is also undetectable because it does not use RF scanning technology or code-grabbing technology.

Easy to use

Autowatch Ghost is a highly efficient and ingenuous security system that disables the engine to stop theft of the vehicle. It operates by using an individual code that is created by the vehicle owner. The code must be entered to allow the car to begin. This advanced technology elevates the overall safety measures of your vehicle, making it a top choice for many drivers. However, this installation requires careful preparation and concentration on detail. This includes ensuring compatibility and using a professional's knowledge in compliance with legal regulations, as well as gaining an understanding of the Ghost II's operational complexities. The importance of these aspects will ensure a successful installation and the best performance.

In contrast to conventional systems unlike conventional systems, the Ghost II is silent and can't be spotted by thieves. It is also small and weatherproof, making it hard to get into. It is compatible with CAN Lenastark, CAN, and other vehicles. It can be used even in vehicles where the battery has to be isolated to ensure maintenance. The Ghost 2 has a Transport Mode that disables the device when your vehicle is being rented or loaned.

To use the Ghost 2, you must have a personalised PIN code to enter prior to starting the vehicle. Installers will assign the default code, but it is advised to change it as quickly as feasible to ensure your safety. The device can enter sleep mode to conserve the battery, however when it detects an engine management system it will wake up and stop the vehicle from beginning. This feature can be disabled by going to the Settings menu. It is advised to use the Ghost immobiliser when your vehicle is being driven, and to make sure to lock it when leaving it unattended.

Easy to install

The Autowatch Ghost 2 immobiliser II is an advanced security system that thwarts car theft by shutting down the engine of the vehicle. It works by using a code that is unique to the owner, which makes it a powerful deterrent. Installing this device requires careful attention to detail and meticulous preparation. By following legal regulations, adhering strictly to the law, and relying on the expertise of experts, you can ensure that the installation process is smooth and get the most out of this security device.

This innovative CANbus immobiliser from Autowatch is simple to install, and operates quietly, so that criminals can't hear it working. It utilizes CAN bus communication to communicate with the vehicle. Compatible with a wide variety of vehicles. It is a real revolution in vehicle security. It also shields your vehicle from hacking, key cloning and car theft, as it won't start unless you have the proper pin code. It is small and weatherproof, making it hard for criminals to alter or locate.

You will need to locate the CAN High (CAN H) & CAN Low (CAN L) Wires on your vehicle's wiring schematic before you begin installing the Ghost Immobiliser. Then, connect the high wire of the CAN to the low and the low CAN wire to the ECU. The wires are located under the dashboard or near the engine.

It is best to work with a certified and trusted installer to install your Ghost immobiliser. You can rest assured that the system is installed correctly and won't disrupt the operation of your vehicle. The installer will also be able provide you with guidance on how much is a ghost immobiliser best to use your new device.