Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the distance between the door and the window is large, you might need to consider an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can reach the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

Upvc Window Repair handles can also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need close your window and do an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs near me-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with a breeze. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler when you have a person to help you hold the frame up.

Check that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrow on each hinge. This shows which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window repairs near me.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear can become misaligned, this can cause gaps to develop between the sash and the frame. They can be repaired by giving them good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window and can be misaligned. Again, it is possible to just give them a clean but in some instances it could be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. They will help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and they may reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as you can.